Monitoring of Hitachi TagmaStore Series Storage Systems in OpStor
OpStor provides monitoring and management of Hitachi TagmaStore Series storage systems
Models Supported
- AMS 200
- AMS 1000
- AMS 1500
- AMS 2100
- AMS 2300
- AMS 2500
- WMS 100
- NSC 55
- USP
- USP-V (or) HP XP24000
- VSP
- HUS 130,150
For monitoring the TagmaStore arrays, OpStor uses two methods.
- Monitoring via SNMP
- Monitoring via SMI-S Provider
Monitoring via SNMP :
Features supported (when monitored through SNMP)
| Inventory Details |
Logical Details |
Monitors |
Report Details |
- Raid Controllers
- Raid Controller Ports
|
- LUNs
- LUN Host Mappings
- InterConnects Info
|
- Raid Controller Status
- Raid Controller Port Status
|
- Availability Reports
- LUN Performance
|
Prerequisites for monitoring Hitachi TagamaStore Arrays through SNMP
- Ensure that SNMP agent is running in the Hitachi TagmaStore device
- Register OpStor server IP address as trap destination
Steps to add Hitachi TagmaStore series in OpStor (through SNMP)
- Navigate to Admin Tab --> Manage Storage Devices link in OpStor client
- Provide IP Address of Hitachi Raid
- Choose the Device Type as 'RAID'
- Choose the Vendor as 'Hitachi'
- Choose the Model as Thunder'
- Provide SNMP Port and Community string (default is 161 and public)
- If needed, change the Timeout value (default is 5 seconds)
- Click on Add Device
Note : If the Ping facility is disabled for the device, then please uncheck 'Ping the given IP' field.
Note : In case of non discovery of the device, please follow the troubleshooting tips displayed in the webclient and try re-adding the device.
Note : Hitachi Device Manager, version 7.0.1 or later is required to support the discovery and monitoring of Hitachi VSP Storage.
Monitoring via SMI-S Provider
Features supported (when monitored through SMI-S)
| Inventory Details |
Logical Details |
Monitors |
Report Details |
- Array Controllers
- Array Controller Ports
- Disk Drives
- Components
|
- Array Groups
- Storage Pools
- Storage Volumes
- LDEV Info
|
- Array Status
- Controller Status
- Controller Port Status
- Drive status
- Storage Pools status
- Storage Volumes status
- LDEV Status
- Components Status
|
|
Prerequisites for monitoring Hitachi TagmaStore Arrays through SMI-S
- OpStor uses Hitachi SMI Provider to monitor the Hitachi Array
- This Provider can be installed on any server that is reachable from the server where OpStor is installed.
Steps to add Hitachi TagmaStore series in OpStor (through SMI-S)
- Navigate to Admin Tab --> Manage Storage Devices link in OpStor client
- Provide IP Address of server where SMI-S Provider is running
- Choose the Device Type as 'RAID'
- Choose the Vendor as 'Hitachi'
- Choose the Model as 'SMI-S'
- In Username field enter the SMI-S Provider username
- In the Password field enter the SMI-S Provider password
- Provide the Port number at which the CIM Agent is running(5989 or 5988)
- Choose whether the SSL should be Enabled(https) or Disabled(http)
- Provide the name space (by default root/hitachi/dm55). This namespace has to be modified depending on the version of HiCommand Device Manager. For example, if the version of HiCommand Device Manager installed is 5.8, then you need to change "dm55" to "dm58". If you are adding Hitachi VSP Storage then you need to specify namespace as /root/smis/smis15 (or) /root/smis/current
- Change the Timeout, if needed
- Click on Add Device.
Note : If the Ping facility is disabled for the device, then please uncheck 'Ping the given IP' field.
Note : In case of non discovery of the device, please follow the troubleshooting tips displayed in the webclient and try re-adding the device.
Note : Hitachi Device Manager, version 7.0.1 or later is required to support the discovery and monitoring of Hitachi VSP Storage.
400-660-8680
